BDHWD - J-CIL SAE 10W MOTOR OIL
- MSDS: BDHWD
- Manufacturer: E C MORRIS CORP
- Product Name: J-CIL SAE 10W MOTOR OIL
- National Stock Number: 9150-00-191-2772
Product Identification
Product ID:J-CIL SAE 10W MOTOR OIL
MSDS Date:01/01/1987
FSC:9150
NIIN:00-191-2772
MSDS Number: BDHWD
Responsible Party
WOOSTER, OH 44691
US
Emergency Phone: 216-264-1126
Info Phone: 216-264-1126
Cage: KO558
Contractor
Telephone: 216-264-1126
Cage: 5X433
Ingredients
>15G/KG),TAKE TLV AS
Fraction By Weight: 91.0%
ACGIH TLV: 5MG/CUM(OILMIST
DETERGENT INHIBITOR (CONTAINS ZINC DIALKYLDITHIOPHOSPHATE)
Fraction By Weight: 8.6%
ACGIH TLV: NOT SPECIFIED
60.3GM/KG)
Fraction By Weight: 0.4%
ACGIH TLV: NOT SPECIFIED
Hazards
Effects of Overexposure:EYES & SKIN:IRRITATION;
INGESTION/INHALATION:CHEMICAL
PNEUMONITIS;DROWSINESS,HEADACHE,NAUSEA
First Aid
First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.
Fire Fighting
Flash Point:410F/210C (C.O.C
Extinguishing Media:CO*2,DRY CHEMICAL,FOAM OR WATER FOG.
Fire Fighting Procedures:NONE NOTED,MAY USE NIOSH/MSHA APPROVED SCBA IN
ENCLOSED AREA
Unusual Fire/Explosion Hazard:WATER MAY CAUSE FROTHING.
Accidental Release
Spill Release Procedures:USE PROPER PERSONAL PROTECTION;USE SUITABLE
DRY,INERT ABSORBENT MATERIALS AND RECOVER FOR PROPER DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN STEEL DRUM OR TANK BELOW
120F;KEEP AWAY FROM HEAT OR OPEN FLAMES.KEEP CONTAINER CLOSED WHEN
NOT IN USE.HANDLE EMPTY CONTAINER CAREFULLY.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES.DO NOT BREATHE
VAPORS OR MIST.
Exposure Controls
Respiratory Protection:USE NIOSH/APPROVED RESPIRATOR FOR ORGANIC
VAPORS/MIST,IF ABOVE TLV
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Supplemental Safety and Health
MSDS UNDATED:ITEM IS GRADE 10 OF SPEC MIL-L-2104
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:700F/371C
Vapor Pres:>.1
Vapor Density:>1.0
Spec Gravity:0.88
Evaporation Rate & Reference:<1.0 (BUT.ACETAT=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT AMBER COLORED LIQUID-FAINT PETROLEUM ODOR
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:HEAT,OPEN FLAMES
Hazardous Decomposition Products:CO,CO*2,TRACE OXIDES OF S,ZN,P
Disposal
Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.